DIY

How To Hang A Door

How to Hang a Door

Whether your doors are damaged or you’re just renovating the interior of your home, the process of hanging a door is one which may seem a daunting task unless you know how. With this step-by-step guide, you’ll learn all you need to know about installing an interior door safely and efficiently.

Tools and materials

Before you get to work, you’ll need to ensure you have the following:

  • Fine-tooth hand saw
  • Screwdriver
  • Spirit level
  • Hammer
  • Wood chisel
  • Planer
  • Tape measure
  • Pencil
  • Door wedge
  • New interior door
  • Hinges and screws

Step 1: Removing your old door

Take your screwdriver and unscrew your old door from its frame.
Take care to ensure that you don’t damage the hinge rebates on the frame; you’ll need to keep these intact so that your new door can be hung securely.
Place your old door neatly out of harm’s way.

Step 2: Measuring the doorframe and your new door

Take your tape measure and measure the doorframe from the bottom to the head of the frame. Make sure you measure both sides; it may be that your frame is not perfectly rectangular.
Now, measure both sides of your new door. If you find that it is longer than the frame, you’ll need to trim it to size.

Step 3: Trimming your door to fit

If your measurements indicate that trimming is necessary, place your door on a work surface and:

Take your fine-tooth saw or planer and begin trimming the door to size. Make sure you do this from the bottom of the door.
When using a planer on interior oak doors or those with clearly-defined growth rings, make sure that you plane in the direction of these.
Also, try to plane towards the centre of the surface to reduce the risk of splintering at the edges.

Step 4: Ensuring your new door fits

Place your new door into the frame.
Ensure there is a 2mm gap between the door and doorframe on all four sides. If not, you’ll need to return the door to your work area and make adjustments with your planer.
If you do need to plane the sides, always plane the side with the hinges – these will be out of the way, so any imperfections will be hidden.
Only plane from both sides if large adjustments need to be made.

Step 5: Fitting the hinges to your door

Once you’re sure that your new door fits nicely into the frame with a 2mm gap on all sides:

Take your pencil and mark the points on the side of your new door where it lines up with the top and bottom of each hinge rebate.
Return the door to your work area, and mark the thickness of your hinges on to the side of the door, between the marks you made earlier.
Then, place the hinges into position and draw around them with your pencil to indicate where they will sit on the edge.
Take your hammer and chisel and cut an outline into the wood, with the depth corresponding to the thickness of the hinge marked earlier.
Now, use your hammer and chisel to remove the material where the hinge will sit, creating a hinge rebate.
Place the hinges neatly into position and screw them into your door.

Step 6: Fitting your door to the frame

Place your new door into the frame, and use wedges to hold it in position.
Now, take your screwdriver and screw the hinges into the hinge rebates of the frame. It’s always easier to attach the top hinge first.
The screw heads need to sit nice and squarely into the hinge, since this will allow the door to open and close much more smoothly.
Once you have fitted most of the screws, have a try at opening and closing your door. If it swings smoothly and easily, attach the remaining screws.

And there we are! You have successfully hung a shiny new interior door. Now, how to get rid of the old oneā€¦

Leave a Reply